|
The Pro-Lite Asher Nolan Signature Traction Pad is back for 2011 and is zapping it's electric styling all over the back of your board! Pro-Lite constructed the Asher Nolan Traction Pad with the following specs: 3 Piece Split Pyramid groove Pad length 310mm, width 307mm Kick height 28mm Arch length 160mm, height 6mm
|
|
|
Surfball? Basurf? Furfball? Be the first to combine football, baseball and surfing and create an entirely new way to play with the On A Mission Benji Weatherly Traction Pad. Pro Surfer Benji Weatherly wants to reflect his hometown love in the colorways of his OAM Pad, so pick your poison: Chargers or Padres. 6 Piece, 8mm of Arch Support, 5mm Side Kick, and 26mm Kick.
|
|
|
Dakine Fish Traction Pad features:15" x 17.5" [38 x 44cm]Six piece pad;NO arch; 20mm rolled tail kick; andextra wide for Fish/ Fun/ Longboards.Can be used with or without kick.
|
|
|
Adam Virs's initials are displayed all over the place on the excellent Pro-Lite Adam Virs Signature Traction Pad, and as far as dimensions go, check these out: 3Piece Split Pyramid groove Pad length 305mm, width 305mm Kick height 28mm Arch length 160mm, height 7mm
|
|
|
Customize your board and show your fan power with the On A Mission The Bravery Traction Pad. Simply designed and simply awesome, just like the band itself. The OAM Bravery Pad was designed with 6mm of arch support, a 28mm kick, and 1 piece construction.
|
|
|
Perf it up with the Pro-Lite Michael Dunphy Signature Traction Pad this season! An awesome check/stripe/perforated design and the following specs make the Michael Dunphy Pad easy to love: 5 Piece Split Pyramid groove Pad length 344mm, width 300mm Kick height 25mm Arch length 160mm, height 7mm
|
|
|
The Innersection Traction Pad is rider designed, tested and approved with a thinner, lighter, grippier EVA. On a Mission's diamond grid pattern consists of tiny 1/8" thick squares which rest on top of diamond shaped foundations. The arch bar acts as a support mechanism for your back foot. Due to the rolled tail kick slanted at a 115 degree angle it provides optimum resistance for back foot pressure. OAM is the originator of rolling grid surface over the kick, leaving a clean, finished look.
|
|
|
Creatures of Leisure's Tailblock is a Performance Traction Pad.Traction Pattern: Cross GridKick Tail: 27mm RampArch Bar: None
|
|
|
The brand new On A Mission Jesse Hines Traction Pad features a killer design, with contrasting stripes and bubbles/polka dots. Of course, the Jesse Hines Traction Pad has OAM's usual quality EVA design and Diamond Grip tread pattern, so you can trust it'll do ya right. 26mm kick, 3 pieces, 8mm arch.
|
|
|
One of Creatures of Leisure's Signature Traction Pad was inspired by Mick Fanning. This pad has a square loc traction design, ultra thin pad base, big kick with bevelled sides and a 3M adhesive backing. The design is a vivid color hand cut pattern. 11.4" x 12.2"Traction Pattern: Square LocKick Tail: 25mm knuckleArch Bar: 7mm teardrop
|
|
|
This signature 5 piece OAM Traction Pad was designed and approved by pro surfer Bede Durbidge. With a simple but classy stripe pattern, the On A Mission Bede Durbidge Traction Pad will spruce up your board nicely, and give you 8mm of Arch Support and a 29.5mm Kick.
|
|
|
Simple and clean, the Pro-Lite Dean Morrison Signature Traction Pad is here to give you the control you need, without giving you an epileptic seizure just by looking at it! The Dean Morrison Traction Pad was lovingly designed by Pro-Lite with the following specifications: 3 Piece Micro-dot groove Pad length 305mm, width 305mm Kick height 25mm Arch length 165mm, height 5mm
|
|
|
Creatures of Leisure's Retro/Fish/Long is a Performance Traction Pad.Traction Pattern: Diamond LocKick Tail: 27mm RampArch Bar: None
|
|
|
Dakine Bruce Pro Traction Pad features: 11.75" x 13.25" [30 x 34cm]Five piece pad;10mm center arch; and steep 25mm rolled tail kick.
|
|
|
The Sea Shepard Jolly Roger traction pad by On A Mission is specially designed, tested and approved so you know they're made for the best, by the best. The result is a thinner, lighter, grippier EVA. On A Mission's specially diamond grid design, which consists of tiny 1/8" thick squares which rest on top of diamond shaped foundation, provide the ultimate traction. The Eva Arch Bar acts as a support mechanism for your back foot as well. To top off this awesome traction pad design is the rolled tail kick, which like all OAM tail kicks slants at a 115 degree angle to provide optimum resistance for back foot pressure. The rolling grid surface over the kick leaves a clean, finished look which strikes the perfect balance between looks and functionality.
|
|
|
A Connor Coffin Signature product from Channel Islands, this traction pad is a three piece, vertical split, flat pad. Available in three colors.
|
|
|
Rock out with your board out by sporting the On A Mission ASG Traction Pad. If you're a true ASG fan, you know where you have to click, otherwise, you're just a worthless poser. The OAM ASG Pad is 1 piece with 6mm of arch support and a 26mm kick.
|
|
|
All you stand up paddle boarders out there, you're in luck, because Ocean & Earth has a durable, grippy, and solid traction pad, just for you: the SUP Board Deck Pad. It comes in 6 pieces with a flat arch and a flat tail kick.
|
|
|
Sized just right for groms, the Sticky Bumps Lucas Angula Signature Traction Pad will give your little dude or dudette the grip and control they need, while looking pretty bitchin' too. The Sticky Bumps Lucas Angulo Traction Pad is sized as follows:6mm center arch1 piece16mm contoured kick tail
|
|
|
Pro-Lite's Basic Arch Traction Pad gives you all the grip and control you need at a price that's right. Specs include: 1 Piece Split Pyramid groove Pad Length 305mm, width 295mm Kick height 25mm Arch length 160mm, height 7mm
|
|
|
black shortboard traction pad.
|
|
|
Creatures of Leisure Stand Up Paddle Board grip comes in two and eight pieces, both in black or charcoal. The two piece has a groove traction pattern, while the eight piece has the cross grid pattern. Both have a 27mm ramp kicktail.
|
|
|
Dakine GPE Traction Pad features:11.75" x 12.25" [30 x 31cm]Three piece pad;10mm center arch; and25mm rolled tail kick.
|
|
|
black and blue short board traction pad.
|
|
|
On A Mission offers the premier traction pad for stand up paddle board. These pads come in a variety of colors and offer 8 feet of adjustable length (6 piece pad with 4 extension pieces) and have a 7mm Arch and 26mm kick for ultimate stability while paddling out on the water.
|
|
|
These On A Mission Fish Fin E.C.O 3 piece traction pads are rider designed, tested and approved so you know they're made for the best, by the best. The result is a thinner, lighter, grippier EVA. On A Mission's specially diamond grid design, which consists of tiny 1/8" thick squares which rest on top of diamond shaped foundation, provide the ultimate traction. The Eva Arch Bar acts as a support mechanism for your back foot as well. To top off this awesome traction pad design is the rolled tail kick, which like all OAM tail kicks slants at a 115 degree angle to provide optimum resistance for back foot pressure. The rolling grid surface over the kick leaves a clean, finished look which strikes the perfect balance between looks and functionality.
|
|
|
Creatures of Leisure's Pro is a Performance Traction Pad.Traction Pattern: Square GridKick Tail: 25mm KnuckleArch Bar: 7mm teardrop
|
|
|
Simple and sexy, the new On A Mission Sterling Spencer Traction Pad sports a simple stripe pattern, a killer fade print, 3 piece design, and features a grippier EVA construction, a diamond grid pattern, an EVA 7MM arch bar, and a 28MM rolled tail kick.
|
|
|
The Pro-Lite Christian Saenz Signature Traction Pad is zebra-fied to the max for your riding pleasure, and is crafted with the following specs: 3 Piece Split Pyramid groove Pad length 300mm, width 300mm Kick height 20mm Arch length 160mm, height 9mm
|
|
|
One of Creatures of Leisure's Signature Traction Pad was inspired by Aaron Cormican. This pad has a square loc traction design, ultra thin pad base, big kick with bevelled sides and a 3M adhesive backing. The design is a vivid color hand cut pattern. 11.4" x 12.4"Traction Pattern: Square LocKick Tail: 27mm rampArch Bar: 7mm teardrop
|
|
