|
These traction pads by On A Mission are specially designed , tested and approved by Alejandro Moreda so you know it's of the highest quality. The result is a thinner, lighter, grippier EVA. On A Mission's specially diamond grid design, which consists of tiny 1/8" thick squares which rest on top of diamond shaped foundation, provide the ultimate traction. The Eva Arch Bar acts as a support mechanism for your back foot as well. To top off this awesome traction pad design is the rolled tail kick, which like all OAM tail kicks slants at a 115 degree angle to provide optimum resistance for back foot pressure. The rolling grid surface over the kick leaves a clean, finished look which strikes the perfect balance between looks and functionality.
|
|
|
One of Creatures of Leisure's Signature Traction Pad was inspired by Andrew Doheny. This pad has a hi-lo traction design, ultra thin pad base, big kick with bevelled sides and a 3M adhesive backing. The design is a vivid color hand cut pattern. 11.4" x 11.8"Traction Pattern: Square GridKick Tail: 30mm rampArch Bar: 7mm teardrop
|
|
|
Blasting off right under your feet is the Pro-Lite The Rocketship Traction Pad! Featureing a cool two-tone colorway (even a rasta one!), and the excellent quality and control you expect from Pro-Lite. The Rocketship Pad's specifications include: 2 Piece Micro-dot groove Pad length 310mm, width 307mm Kick height 25mm Flat pad
|
|
|
black shortboard traction pad.
|
|
|
Dakine Hobgood Pro Traction Pad features: 11.75" x 12.25" [30 x 31cm]Two piece pad; NO arch; and20mm rolled tail kick.
|
|
|
Perf it up with the Pro-Lite Michael Dunphy Signature Traction Pad this season! An awesome check/stripe/perforated design and the following specs make the Michael Dunphy Pad easy to love: 5 Piece Split Pyramid groove Pad length 344mm, width 300mm Kick height 25mm Arch length 160mm, height 7mm
|
|
|
Pro-Lite's Jay Quinn Signature Traction Pad is simple and to the point, giving you the control you need without a lot of crazy pizazz to get in the way. Pro-Lite made the Jay Quinn Traction Pad with these specs: 5 Piece Split Pyramid groove Pad length 340mm, width 305mm Kick height 25mm Arch length 120mm, height 4mm
|
|
|
Dakine Pancho Pro Traction Pad features:11.75" x 12.25" [30 x 31cm]Three piece pad; 10mm center arch; and steep 25mm rolled tail kick.
|
|
|
The Pro-Lite Asher Nolan Signature Traction Pad is back for 2011 and is zapping it's electric styling all over the back of your board! Pro-Lite constructed the Asher Nolan Traction Pad with the following specs: 3 Piece Split Pyramid groove Pad length 310mm, width 307mm Kick height 28mm Arch length 160mm, height 6mm
|
|
|
Channel Islands Cutout 3 Piece Arch Pad explains itself, it's soft and sticky with an arch. It has a medium height kick and cuts in the arch piece, which allows the pad to compress when needed.
|
|
|
If a tail kick is all you need, then a tail kick you shall get! The Ocean & Earth Tail Kick Traction Pad sports a 1 piece, diamond grip, with a 25mm of, you guessed it, tail kick.
|
|
|
black and white short board traction pads.
|
|
|
The On A Mission Paulo Prietto Traction Pad features all new pattern designs for a fresh look, and OAM's signature features like a rolled tail kick for more control, an EVA arch bar, a super grippy Diamond Grid tread pattern, and a light and durable EVA construction. OAM's Paulo Prietto Traction pad sports a 5 piece setup, 6mm arch, and 28mm kick.
|
|
|
For you big stick riders out there, look no further than this Pro-Lite Basic Longboard Traction Pad for all your grip and control needs! The Pro-Lite Basic Longboard Pad measures out at the following specs: 3 Piece Split Pyramid groove Pad length 370mm, width 305mm Kick height 23mm Arch length 178mm, height 5mm
|
|
|
This signature 5 piece OAM Traction Pad was designed and approved by pro surfer Bede Durbidge. With a simple but classy stripe pattern, the On A Mission Bede Durbidge Traction Pad will spruce up your board nicely, and give you 8mm of Arch Support and a 29.5mm Kick.
|
|
|
The Innersection Traction Pad is rider designed, tested and approved with a thinner, lighter, grippier EVA. On a Mission's diamond grid pattern consists of tiny 1/8" thick squares which rest on top of diamond shaped foundations. The arch bar acts as a support mechanism for your back foot. Due to the rolled tail kick slanted at a 115 degree angle it provides optimum resistance for back foot pressure. OAM is the originator of rolling grid surface over the kick, leaving a clean, finished look.
|
|
|
One of Creatures of Leisure's Signature Traction Pad was inspired by Ry Craike. This pad has a hi-lo traction design, ultra thin pad base, big kick with bevelled sides and a 3M adhesive backing. The design is a vivid color hand cut pattern. 11.6" x 12.2"Traction Pattern: Square GridKick Tail: 30mm rampArch Bar: 9mm spearhead
|
|
|
Dakine Eric G Pro Traction Pad features:11.75" x 12.25" [30 x 31cm]Three piece pad; 10mm center arch; and 25mm steep rolled tail kick.
|
|
|
Pro-Lite team rider Maz Quinn's Signature Traction Pad is here for 2011, with a sick contrast stripe pattern, and these size specifications for excellent control: 3 Piece Split Pyramid groove Pad length 310mm, width 300mm Kick height 28mm Arch length 160mm, height 7mm
|
|
|
The 2011 Pro-Lite Anthony Petruso Signature Traction Pad is here in all it's zig-zaggy glory to give you the control you need when shreddin' the gnar. The Anthony Petruso Traction Pad houses these specifications: 3 Piece Split Pyramid groove Pad length 310mm, width 310mm Kick height 25mm Arch length 150mm, height 5mm
|
|
|
One of Creatures of Leisure's Signature Traction Pad was inspired by Aaron Cormican. This pad has a square loc traction design, ultra thin pad base, big kick with bevelled sides and a 3M adhesive backing. The design is a vivid color hand cut pattern. 11.4" x 12.4"Traction Pattern: Square LocKick Tail: 27mm rampArch Bar: 7mm teardrop
|
|
|
Simple and sexy, the new On A Mission Sterling Spencer Traction Pad sports a simple stripe pattern, a killer fade print, 3 piece design, and features a grippier EVA construction, a diamond grid pattern, an EVA 7MM arch bar, and a 28MM rolled tail kick.
|
|
|
One of Creatures of Leisure's Signature Traction Pad was inspired by Koa Smith. This pad has a square loc traction design, ultra thin pad base, big kick with bevelled sides and a 3M adhesive backing. The design is a vivid color hand cut pattern. 11.4" x 11.8"Traction Pattern: Square LocKick Tail: 30mm rampArch Bar: 9mm spearhead
|
|
|
One of Creatures of Leisure's Signature Traction Pad was inspired by Garrett Parkes. This pad has a diamond loc traction design, ultra thin pad base, big kick with bevelled sides and a 3M adhesive backing. The design is a vivid color hand cut pattern. 11.4" x 11.8"Traction Pattern: Diamond LocKick Tail:30mm rampArch Bar: 7mm teardrop
|
|
|
Nate Yeomans is King of the Argyles, and it shows in the On A Mission Nate Yeomans Traction Pad. The colorways are almost all argyle patterns, just like Dad's old socks, but no socks I've ever seen have 5 customizable pieces, 7mm of Arch Support and a 26mm Kick.
|
|
|
On A Mission offers the premier traction pad for stand up paddle board. These pads come in a variety of colors and offer 8 feet of adjustable length (6 piece pad with 4 extension pieces) and have a 7mm Arch and 26mm kick for ultimate stability while paddling out on the water.
|
|
|
The On A Mission Alex Gray Traction Pad has some awesome colorways, and is designed, of course, by pro surfer Alex Gray. This is a 3 piece traction pad, with 7mm of Arch support, and a 30mm kick.
|
|
|
black and blue short board traction pad.
|
|
|
One of Creatures of Leisure's Signature Traction Pad was inspired by Dusty Payne. This pad has a hi-lo traction design, ultra thin pad base, big kick with bevelled sides and a 3M adhesive backing. The design is a vivid color hand cut pattern. 11.4" x 11.8"Traction Pattern: Cross GridKick Tail:27mm rampArch Bar: 7mm teardrop
|
|
|
20" x 20" sheet of cross grid traction that can be customized to fit any board with a super thin pad base and 3M adhesive backing.
|
|
